Used Metal Industry Equipment Newsgroup

Location: USA, LUXEMBURG WI

Scharmann 4.0.
Make: Scharmann Model: WB100 Serial #: 5806 New: 1951 Spindle ( Quill ) diameter.....................................4.0” Spindle travel ( Quill Extension) (z-axis)..36.0'' Spindle taper...................#6MT Morse Taper Spindle speeds..................11 RPM to 373 RPM Spindle speed control: 2 high/low range speed controls on motor, plus 4 high and 4 low speed controls on gear box Spindle motor..........................8.6 hp Table size.............................56'' x 64'' Table cross travel (x-axis)............64'' Table saddle travel (w-axis) (to and away from spindle)...84'' Vertical travel of headstock (up and down) (y-axis)……..56'' Feeds to spindle, headstock, table & saddle (12 feeds) 0.04 to 6.35 mm per revolution Equipped with: ACU-RITE AR05 Scale Linear Encoder System digital readout on y-axis and x-axis wired 440/3/60 Inspect under power in our facility. Comments on condition: This unit is presently in our shop, hooked up under power. We have used this unit for the last 10+ years for boring steel weldments, in our single shift plant. Typical usage was about 20 hours per week. The unit needs the clutches replaced. When heavy boring is required, the clutches slip. For best operating condition, clutches should be replaced and quill extension bearings should be replaced for best accuracy when quill is fully extended. Priced ‘as is’, ‘where is’ and does not include removal, rigging, trucking, or other related costs. Seller will disconnect wiring/electrical from building source. This summary sheet is a good faith summary of the information on this item, but is not guaranteed to be accurate. The purchaser is to personally verify specifications prior to purchase, or hire a professional to inspect such. Unit is offered as is where is. Purchaser and/or Rigging company who will remove this on behalf of the purchaser, must present valid insurance binder to cover and risk of loss or liability from removal of unit.